How loud is a Hisense dehumidifier in decibels?
A Hisense dehumidifier lists 45 to 52 dB(A) on Hisense's own spec tables, depending on model and row. The 50-pint DH5026K1W sits lowest and the 60-pint DH6024KP1WG highest.
The numbers live in the Full Specs table on each product page. Units with several speeds get two rows, worded "dBA levels (+/- dBA tol) high" and "dBA levels (+/- dBA tol) low". The single-speed DH2526K1W gets one row, "Noise Level in dB(A)". Hisense never says how far from the cabinet it measured or under which standard, and the tolerance in the label is never given a size.
- DH5026K1W, 50 pints, no pump: 45 dB(A) high, 48 dB(A) low.
- DH5026KP1G, 50 pints, built-in pump: 45 dB(A) high, 48 dB(A) low.
- DH3526K1W, 35 pints: 45 dB(A) high, 49 dB(A) low.
- DH6024KP1WG, 60 pints, built-in pump: 50 dB(A) high, 52 dB(A) low.
- DH2526K1W, 25 pints, one fan speed: 47 dB(A).
- DH5023KP, 50 pints, built-in pump, older R-410A design: 45 and 48 with no unit in its table, and "45-48 dB" on its 2020 spec sheet.
Which Hisense dehumidifier is quietest on each row?
The DH5026K1W and DH5026KP1G list the least on both rows, and the DH3526K1W ties them on the high row. Each list below sets one Hisense row label only against itself.
The row Hisense labels high
- DH5026K1W, DH5026KP1G and DH3526K1W: 45 dB(A) each.
- DH6024KP1WG: 50 dB(A).
The row Hisense labels low
- DH5026K1W and DH5026KP1G: 48 dB(A) each.
- DH3526K1W: 49 dB(A).
- DH6024KP1WG: 52 dB(A).
The DH2526K1W's 47 dB(A) comes from a differently worded row on a unit with one fan speed, so it fits neither list. Nor does the DH5023KP, whose table rows carry the same labels as the others but print 45 and 48 without any unit.
Why does Hisense list a higher number for low than for high?
Hisense gives no reason. All four current two-row tables put the larger figure under low, by 2 to 4 dB(A), yet the manuals describe LOW as the speed that will "Reach the desired humidity setting with lower sound level".
Two readings fit the documents. The labels may be swapped somewhere in Hisense's product data, or the two rows may have been taken under conditions Hisense does not describe. Each would change what the numbers mean, and neither can be checked from outside Hisense.
The DH5026K1W page adds a third number. A feature panel headed "Quiet Airflow Minimizes Noise" reads "High-performance fan guarantees quiet operation at 46 dB(A)" on Low, a value between the table's 45 and 48 that matches neither.
What survives is the order. Whichever row is truly the slow speed, the 50-pint pair lists the least on both, the 35-pint unit matches or trails it by one, and the 60-pint unit trails by four or five. That is why the picks above rank within a row and never across rows.
What is the noise level of the Hisense 50 pint dehumidifier?
The Hisense 50 pint DH5026K1W lists 45 dB(A) on its high row and 48 dB(A) on its low row, and the DH5026KP1G with a pump lists the same pair. The older DH5023KP spec sheet reads "45-48 dB".
Hisense sells three 50-pint units. The DH5026K1W drains to its bucket or a garden hose; the DH5026KP1G adds a pump rated to 16 vertical feet and weighs 40.3 lbs. Both tables carry an earlier model number, DH5024K1W and DH5024KP1G, and both list R-32 refrigerant and Energy Star.
The DH5023KP is the outlier. Hisense's listing still shows it, but its spec sheet is dated 2020, it runs on R-410A, and its table repeats 45 and 48 as bare numbers. Where a retailer offers both, the DH5026 models are the newer design.
What is the noise level of the Hisense 35 pint dehumidifier?
The Hisense 35 pint DH3526K1W lists 45 dB(A) on the high row and 49 dB(A) on the low row, level with the 50-pint models on one row and a single dB(A) above them on the other.
Its page borrows the spec table and manual of the earlier DH3524K1W, model number and all, and that table lists a 16 foot pump discharge height for a unit with no pump. The noise rows may be carried over as well. With an unstated tolerance, a one dB(A) gap is not worth paying to close.
Does a Hisense dehumidifier with a pump make more noise?
No, not on Hisense's 50-pint figures: the DH5026KP1G with a pump and the DH5026K1W without one both list 45 and 48 dB(A). Hisense publishes no separate figure for the pump running.
The other pump model, the 60-pint DH6024KP1WG, lists 50 and 52 dB(A), but it is also the biggest cabinet in the range, so its higher figures say more about size than about the pump. Hisense rates both pumps to 16 feet of lift, and the 60-pint manual caps the hose at 16 ft.
Does the Hisense 60 pint dehumidifier have a quiet mode?
Yes, the DH6024KP1WG manual describes a QUIET button that will "run the dehumidifier in lower noise operation". Hisense publishes no decibel figure for that mode, and the unit leaves it whenever the mode or fan speed changes.
It is also the only current Hisense with a MID speed listed by name, as "3 Speeds (HIGH MID LOW)". The 35 and 50-pint manuals describe LOW and HIGH only. With no number for MID or Quiet, the 50 and 52 dB(A) rows are all there is to go on.
Are Hisense dehumidifiers quiet?
Yes, by Hisense's own account: its pages call several models quiet, and its tables stay between 45 and 52 dB(A). How that compares with another brand is harder to say, since Hisense names no distance or standard.
Frigidaire, for instance, prints a dBA figure against each named fan speed in its dehumidifier chart. Setting a Hisense row beside one of those means trusting that both makers measured alike, and the reversed Hisense labels make that a bigger leap. Other makers sit together in the quietest dehumidifiers, and Hisense's cooling range in its air conditioner chart.
What noises are normal from a Hisense dehumidifier?
Hisense's manuals name three normal sounds: "Air movement from the fan", "Clicks from the thermostat cycling", and "A high-pitched hum or pulsating noise caused by the high-efficiency compressor cycling on and off."
Rattling is not on that list. The manuals tell owners to unplug the unit and call customer service if it "makes a strange noise", and they ask for a level surface strong enough to hold a full bucket, plus 12 to 18 inches of space around the louvers.
Cold rooms change the sound too. Hisense rates these units down to 38°F, and the manuals say the de-icing function "will turn off the compressor if a low temperature condition occurs", so in a chilly basement expect the compressor to stop and restart more often than in a warm room.
